- Versatility - Ecological - Easy installation - Easy maintenance - It occupies very little space
It can be used with class A, B, C and F fires. - Class A: Common fuels (wood or trash) - Class B: Flammable or combustible liquids (gasoline, solvents) - Class C: Electrical equipment (voltage must not exceed 75 kV) - Class F: Vegetable or animal oils and fats (kitchens)
How it works?
- Acts in chain reaction of fire, eliminating free radicals from the flame. - Concentrated aerosol composed mainly of potassium salts. - Does not exhaust oxygen during extinction!
Ecological product - Its effects on the atmosphere are insignificant, so it has a clear advantage compared to gases used for similar extinctions. - The state is imposing everyday more taxes and restrictions to avoid the greenhouse effect caused by some gases.
Where can it be installed? - Fixed installations: trafo, electrical panels, industrial machinery, warehouses, offices, archives, tunnels. - Installations for vehicles: Buses, trucks, tractors, railways. - Marine rooms: Boats
Certifications and accreditations worldwide
- CEN TR 15276-1 & 15.276-2 - ISO 15779: 2011 - Condensed Aerosol Fire Extinguishing Systems - NFPA 2010 - Standard for Fixed Aerosol Fire Extinguishing Systems - UL 2775 - Standard for Fixed Aerosol Fire Extinguishing Systems Units - ULC 2775 - Standard for Fixed Aerosol Fire Extinguishing Systems Units - Activefire AS4487-2013 - Kiwa BRL-K23001 / abr 2013 - IMO MSC.1 / Circular.1270 - RINA MSC.1 / Circular.1270 - Bureau Veritas BV Rules Part C CH4 SOLAS 74, es amended, Ch II.2 IMO MSC / Circ. 1007 IMO MSC. 1 / Circ. 1270
What does the installation consist in?
- Control center - Control modules for the generators - Spray generators - Detection: point detectors, thermal cable, detection by aspiration, etc. - Stop button - Trigger button - Disconnection key (for maintenance)
Check the following items:
- Electrical wire - Electrical ignition terminals - Electrical contacts - Clamping screws Replace the aerosol generators after 15 years.